Miscellaneous
 


STRUCTURAL STEEL | STAIRS & LADDERS | DECORATIVE | MISC.

PHOTO GALLERY

At Structures Plus we are engaged in designing, and manufacturing custom projects and components for our customers. Below is some of our equipment that we use in the process for manufacturing. If you have something you need to have produced, please give us a call us for an evaluation and estimate.
 

Peddinghaus CNC controlled BDL Drill

This piece of equipment is CNC controlled for precise and accurate layout of all the holes. Once the program is imported and the material is loaded, the machine takes care of positioning the material and drilling the holes therefore eliminating the chance of human layout errors.

Specifications:

  • 30” Maximum Beam Width

  • 16” Maximum Flange Height

  • 3 Spindles – up to 1-1/4” diameter holes

  • Carbide marking system – For part identification

 

CR Electronics NEXUS Burn Table 

This piece of equipment is equipped with CNC controlled Plasma and Fuel Torches. It features a positive downdraft burn table along with a Tama Bag House for removing the gasses and smoke from the work environment.

With the Hypertherm HP2000 Plasma power source we can achieve high speed plasma cutting from 1” to 500” per minute depending on the plate thickness and ranging from light gauge sheets up to 2” thick plate.

We can efficiently cut your parts as well using up to four fuel torches at a time on plate thicknesses up to 10” thick.

Specifications:

  • 8 ft. x 20 ft. Plate Capacity

  • Mild steel

  • Stainless Steel

  • Aluminum

 

Hyd Mech M20 A  Band Saw

This saw is a vertical feed saw used primarily for sawing structural members such as pipe, wide flange I-Beams, hollow structural tubing etc. It has programmable indexing capabilities for making multiple small parts of exact lengths.

Specifications:

  • Rectangle: 20” x 30”

  • Round: 20” diameter

  • Round 45 degree: 20” diameter

  • Round 30 degree: 14” diameter

  • Square 45 degree: 12” x 20”

  • Square 30 degree: 19” x 20”

  • Bundle Capacities

  • Full stroke vices with 33” shuttle stroke – Multi indexing – for programmed cutting

  • Positive down feed

 

Hyd Mech V18 Band Saw

This saw is a horizontal feed saw used primarily for sawing structural members such as pipe, wide flange I-Beams, hollow structural tubing etc. It has programmable indexing capabilities for making multiple small parts of exact lengths.

Specifications:

Vertical (90 degree cut):

  • Rectangle: 18: W x 22” H

  • Round: 18” diameter

45 degree Tilt:

  • Rectangle” 18” W x 14” H

  • Round: 14” diameter

  • Maximum Vice Opening: 18”

 

Edwards Iron Worker 100 Ton

This piece of equipment has a wide range of functions it can perform through its notching, punching and shearing features.

Specifications:

  • 1-1/4” hole capacity thru 1” plate

  • Shearing capacity to 14” Wide

  • Square holes

  • Round holes

  • Hexagon holes

  • Oblong holes

 

Accur Press – Press Brake

From sheet metal to Ό” plate. This machine is a workhorse for all of our bending needs.

Specifications:

  • 60 Ton Capacity

  • 8’ Maximum length

 

Do All Band Saw

This indexing saw is capable of making 1000’s of exact cut length component parts generally short in length.

 

© Copyright 2001, Structures Plus
All Rights Reserved